some general cabinet specs along with a collection of pictures and illustrations demonstrating design and installers info plus some unique tricks
General Cabinet Dimensions and Functions
| Base Cabinets are typically 34 1/2″ tall, 24″ deep and 9″ to 36″ wide (widths run in 3″ increments) …. face frame is 30″ high plus a 4 1/2″ toe kick indentation  |
Wall Cabinets are 30″ tall but may also be available in 36″ and 42″ high. Usually 12″ deep and again, widths in 3″ increments from 9″ to 36″ wide  |
|
Base Corner
|
|
|
Wall Corner
|
|
|
End Cabs
|
Tall Cabs – Wall Pantry Oven
|
|
Wall Bridge Cabinets are used to span the
|
Specialty Items
|
<img ” title=”csf” src=”https://rtacabinetmall.com/rtacabinetsblog/wp-content/uploads/csf.jpg” alt=”corner sink front” width=”500″ height=”500″ />Corner sink front requires a cabinet or end panel on both sides.
Oven Cabinets- sig-man-cof-crm-elt—By removing drawers from below, max opening height to 51 5/8″
understanding a blind base cabinet
Using a standard depth WDC to create the illusion of a Wall Corner Bump out Note: use end skins for a 15 inch deep cabinet
a way to end crown with a bump up but no bump out
Use a standard base as a sink base with a working bottom drawer…flip the face frame during assembly and place the floor panel above the drawer …make sure you have room for the pea trap